5 Adjustment of the Zoom

1. Steering bar

The height of the steering bar can be adjusted by releasing the handle on the right side of the steering bar. Make sure to fasten the handle tightly to ensure safe operation.

2. Footrest

The foot rest is for safety and comfort. Always keep your feet on the foot rest when riding. The foot rest can be adjusted to rider height by mounting it in the desired position using the pre-drilled adjustment holes.

The footrest position can be adjusted by removing the two bolts on the right side of the frame. One bolt has a fast-release handle that lets you quickly fold the footrest upward for transport, reducing the ZOOM’s overall length. To adjust the footrest position, both bolts must be removed. Note the washers between the steel parts.

Note!
Hold the top of the foot rest when replacing it in riding position to avoid dropping it to the ground. Make sure the screws are tightly secured. Pull the handle to set it to a horizontal position.

Warning
Avoid pinching your fingers between the foot rest and the frame when returning the foot rest to the riding position.

3. Seat

The seat’s position and angle can be adjusted to rider preference. If necessary, the seat can be positioned closer to or farther from the steering column by drilling new holes in the front of the seat. New holes can also be drilled in the side of the seat to adjust the angle of the seat.

Make sure to adjust the distance to the steering column before adjusting the angle